Skip to main content

Measuring inclines?

Comments

2 comments

  • Neil Venn

    Hello

    I used an inclinometer app on my phone - easier than doing the maths.

    I did use a "longer plane" - I just carried a plank of wood with me as I don't use a walking pole. And the plank meant that I could actually balance the phone on it. I think I do need to carve and colour the plank for next time as I looked a bit of plank myself carrying a lump of timber from Wickes on a countryside walk!

    I think there is a video linked from the Surveyor training for manual measurement but we've got it easy using metric measurements. Use a 100cm plane held horizontal with one end touching the ground and measure down from the other end to the ground vertically. If that measurement was 100cm you'd be looking at a 100% include - so if it's only 26cm then it's a 26% incline. Easy.

    But laying the plane on the ground, balancing your phone and reading the measured incline is arguably easier :-)

    Neil

    2
  • Lynn Jackson

    Thanks Neil,

    And to add more information on this, my husband showed me how to complete this using the tangential calculation.

    I used my pole to straighten out the incline - it came to 10 degrees, which I logged.

    Back home I used a calculator and entered '10' then hit 'tan' - this gave me 17.63... multiply by 100 and you get 17.63%.

    This is much quicker than using a plane and ruler.

     

    0

Please sign in to leave a comment.

Powered by Zendesk